UPster H500 GiO AC pass-through dishwasher with integrated GiO reverse osmosis water treatment unit for spot free washing and hygienically flawless washing results, incorporating Air Concept integrated air management unit with built-in, self-cleaning heat recovery unit. Machine constructed throughout in type 304 (1.4301) high grade stainless steel and with full external stainless steel cladding. Additional features include pressed tank with large radius coved corners, double wall construction for excellent sound and heat insulation, and sloped internal upper wash tank surfaces to prevent dripping onto clean items.
Up to 720 dinner plates per hour
(Dependent upon electrical and water temperature connections)
Dimensions: 635mm wide x 750mm deep x 2140mm (h) (Top of AC unit)
Passing height 440 mm
Basket size 500 mm x 500 mm
Available 400/50/3phase
Capacity: 40 racks per hour
10ºC cold fill 3 phase: 9.83 kW
Product listed in WRAS water fittings and materials directory. Certificate No. 1607063. This appliance has a Fluid Category 5 backflow prevention device built-in.
Provided with the following features: -
90/150/240 second programmes
Water connection 1 x 22 mm ¾” BSP
Suitable for a softened cold water supply
Water supply pressure 1-5 bar
Minimum flow rate 8lt/min
Tank fill capacity 22lt
Final rinse consumption 2.6lt/basket
Waste connection 2 x 40 mm Ø standing waste
Wash pump motor rating 0.75 kW
Detergent and rinse dosing aid pump incorporated
Hose and cable connection kit supplied
Drain pump and rinse booster pump fitted as standard
Soft start feature on wash pump motor
Rotating upper and lower rinse and wash arms
Aqua-stop system for water leak detection
Aktiv plus double filtration of wash water
Perforated covers over wash tank
Internal basket guides adjustable on site for corner or straight operation
MIKE 2 Infrared interface for exchange of data services
Touch sensitive control (no switches)
Self-cleaning cycle following drain down
Two (2) finger type plate racks
One (1) open type cup/bowl rack
Two (2) eight compartment cutlery racks
Note:
GiO module overall dimensions 140mm (w) x 550 mm (d) x 600 mm (h)
Feed water temperature to be not less than 1ºC and not more than 30ºC.
Maximum hardness of the untreated water not to exceed 24° Clarke (343ppm)
Conductivity of the untreated feed water to be no more than 1000 NS/cm
Purity level of the treated water in the region of 98%
Water filter, stop-valve, non-return check valve, pressure reducing valve and manometer included as part of the connection kit.
Supplied filter to be changed, interval dependent on water quality.
GiO-Module mounted to one side of the machine.
Incorporating Point Air Concept integrated air management unit with built-in, self-cleaning heat recovery unit.
Machine overall height with Air Concept fitted will be 2140mm.
Machine requires a cold water fill only.
Machine equipped with built-in self-cleaning nozzles.
Exhaust air temperature with incoming water at 12°C will be 25°C.
Reduction of steam volume discharged into the wash-up area will be 80%.
Reduction in the connected load of the washing machine will be 1.5kW.
Stainless steel heat recovery unit for GiO machine.
A minimum of 20-25 air changes per hour required within the dish wash area for efficient operation of the AC unit.
Up to 720 dinner plates per hour
(Dependent upon electrical and water temperature connections)
Dimensions: 635mm wide x 750mm deep x 2140mm (h) (Top of AC unit)
Passing height 440 mm
Basket size 500 mm x 500 mm
Available 400/50/3phase
Capacity: 40 racks per hour
10ºC cold fill 3 phase: 9.83 kW
Product listed in WRAS water fittings and materials directory. Certificate No. 1607063. This appliance has a Fluid Category 5 backflow prevention device built-in.
Provided with the following features: -
90/150/240 second programmes
Water connection 1 x 22 mm ¾” BSP
Suitable for a softened cold water supply
Water supply pressure 1-5 bar
Minimum flow rate 8lt/min
Tank fill capacity 22lt
Final rinse consumption 2.6lt/basket
Waste connection 2 x 40 mm Ø standing waste
Wash pump motor rating 0.75 kW
Detergent and rinse dosing aid pump incorporated
Hose and cable connection kit supplied
Drain pump and rinse booster pump fitted as standard
Soft start feature on wash pump motor
Rotating upper and lower rinse and wash arms
Aqua-stop system for water leak detection
Aktiv plus double filtration of wash water
Perforated covers over wash tank
Internal basket guides adjustable on site for corner or straight operation
MIKE 2 Infrared interface for exchange of data services
Touch sensitive control (no switches)
Self-cleaning cycle following drain down
Two (2) finger type plate racks
One (1) open type cup/bowl rack
Two (2) eight compartment cutlery racks
Note:
GiO module overall dimensions 140mm (w) x 550 mm (d) x 600 mm (h)
Feed water temperature to be not less than 1ºC and not more than 30ºC.
Maximum hardness of the untreated water not to exceed 24° Clarke (343ppm)
Conductivity of the untreated feed water to be no more than 1000 NS/cm
Purity level of the treated water in the region of 98%
Water filter, stop-valve, non-return check valve, pressure reducing valve and manometer included as part of the connection kit.
Supplied filter to be changed, interval dependent on water quality.
GiO-Module mounted to one side of the machine.
Incorporating Point Air Concept integrated air management unit with built-in, self-cleaning heat recovery unit.
Machine overall height with Air Concept fitted will be 2140mm.
Machine requires a cold water fill only.
Machine equipped with built-in self-cleaning nozzles.
No additional water need for the self-cleaning process
Exhaust air extraction program extension time will be 30 seconds.
Reduction in radiated heat transmitted from the machine will be 1.3kW. Exhaust air temperature with incoming water at 12°C will be 25°C.
Reduction of steam volume discharged into the wash-up area will be 80%.
Reduction in the connected load of the washing machine will be 1.5kW.
Stainless steel heat recovery unit for GiO machine.
A minimum of 20-25 air changes per hour required within the dish wash area for efficient operation of the AC unit.
