Blue Seal G54C Gas Range Convection Oven 750mm
Spec Sheet - V11404.pdf
- Heavy-duty construction
- 7kW open burners
- Flame failure standard
- Pilot burners optional
- 300mm griddle plate options
- Optional simmer plates
- GN 1/1 gas convection oven
- Drop down door
- Rear rollers
- Stainless steel exterior
- Easy clean
- Easy service
- Fully modular
| Overall Construction • Galvanized steel chassis • Welded hob with 1.5mm stainless steel bull nose • Hob sides 1.2mm stainless steel • Splashback 1.2mm stainless steel • Front panels and oven sides 0.9mm stainless steel • Enamelled hob control panel • 63mm dia. heavy-duty 1.2mm stainless steel adjustable legs at front and two rollers at rear | | Controls • Large easy use control knob - heat resistant reinforced • Easy view control settings on knob Cooktop • Variable high to low controls to open burners • Open burners flame failure standard with pilot burners optional • Variable high to low controls to griddles • Griddles standard with pilot, flame failure and piezo ignition |
| Cooktop • Cast iron 7kW open burners with forged brass cap • Enamelled cast iron potstands • Enamelled open burner spill covers • Cast iron simmer plates (optional extra) • 12mm thick mild steel griddle plates • 2.5mm stainless steel griddle splash guards • Stainless steel spill trays • Aluminised steel internal construction Griddle sections are standard on RH side. Available on LH side to order or by conversion. | Oven • 50-320°C thermostatic control • Indicator lights for power and heating • Piezo ignition to pilot burner • Flame failure • Fan and burner automatic off when door open | |
| Oven • Fully welded and enamelled oven liner • GN 1/1 capacity with 4 position racking • Heavy-duty easy remove heavy wire chrome rack supports • Cast iron even heat oven sole plate • 9kW oven burner • Pilot and flame failure with piezo ignition • 100W heavy-duty motor • 200mm diameter heavy-duty circulation fan • Drop down door • 0.9mm stainless steel door outer • 1.0mm enamelled door inner • High density fibreglass insulated • Supplied with two chrome wire oven racks | Cleaning and Servicing • All models with easy clean stainless steel external finish • Lift off burner heads and enamelled burner spill covers • Stainless steel spill trays under open burner and griddle sections • Bottom sill removable for oven burner and pilot access • Removable oven racking and sole plate • Easy clean enamelled oven and door inner • Access to all parts from front of unit |
| Specifications | | |
| Burners Open Burners 7kW dual flame ring with simmer rate Griddle Burners 6kW per 300mm section Oven 9kW tubular under cast iron sole plate | Gas connection R 3/4 (BSP) male Optional underside connection, please specify when ordering All units supplied with Natural and LP gas regulator | |
| Gas power (gross) G54C - 29kW, 98,500 Btu/hr | Dimensions Width 750mm Depth 812mm Height 915mm Incl. splashback 1085mm | |
| Oven Fan Motor 100W | Nett weight 181kg | |
| Electrical requirements 230-240Vac, 50/60hz, 1P+N+E, 0.13kW, 0.6A 3 pin 13A plug cordset fitted | Packing data 0.87m3, 240 kg Width 795mm Depth 870mm Height 1255mm | |
| Griddle Plate 300mm Griddle cooking surface 292mm x 475mm, 1387cm2 | Gas types Available in Natural gas and LP gas, please specify when ordering Units supplied complete with gas type conversion kits | |
| Oven Dimensions Width 500mm Depth 590mm Height 385mm Rack size 495mm x 540mm Rack positions 4 | Options Adjustable feet at rear Simmer plates (replaces Potstand) Ribbed griddle plates Joining caps Castors | |
